|
| |
HV Series
|
|
|
|
|
|
HIP-2H
2-way splitter
5-1000 MHz
|
HIP-3H
3-way splitter
5-1000 MHz
|
HIP-4H
4-way splitter
5-1000 MHz
|
|
|
| Completely compatible with current return path requirements, this cost-effective series was designed and tested using state-of-the-art procedures. |
- Consistent shielding, over 130dB
- Flat-end ports support flush connector-to-port contact, 75ohm
- Higher rear cover plating, over .5um with a clear lacquer coating
- Higher seizing pin holding force, 80 gram
- Input hum/DC isolation circuit at >60dB
- Operating temperature range, -40F to +140F
|
|
HV Series
|
|
|
|
|
HIP-6V
6-way networks
low intermodulation splitter
Round Seizure
5-1000 MHz
|
HIP-8V
8-way networks
low intermodulation splitter
Round Seizure
5-1000 MHz
|
|
|
| To meet the stringent demands of return path, high-frequency data and highly corrosive environments, these splitters feature enhanced mechanical and electrical properties. The series incorporates input hum reduction circuitry, lacquered rear covers and hex/phillips/slot ground screws, plus high-quality solder-sealed covers for advance shielding. |
-
- Compliant with SCTE splitter guidelines
- Flat-end ports support flush connector-to-port contact, 75ohm
- Lacquered rear cover improves corrosion resistance
- Larger weather boot sealing ridge gives tight boot seal
- Operating temperature range, -40F to +140F
- Port protection caps protects precision threads from damage
- Round seizure pin for complete contact
- Smaller aperture port (.24) assures metal-metal contact between the inside of the connector and the port surface connector
|
|
|
|
