|
Part # |
Description |
Image |
Qty/Box |
Use This Fitting When... |
|
CO200 |
2"
Coupling
Fitting |
|
100 |
...you're joining two pieces of molding.
This Fitting covers the seam.
The new improved CO200 comes with a metal insert for added security.
|
|
OC200 |
2"
Outside
Corner
Fitting |
|
100 |
...you want to make a 90° outside turn around a corner (such as two outside walls). |
|
RA200 |
2"
90° Right
Angle
Fitting |
|
25 |
...you want to make a left or right turn at a 90° angle on a flat surface.
This is a 2-piece fitting. The RA200 snaps onto a right angle clip.
|
|
EC200 |
2"
End Cap
Fitting |
|
100 |
...you want to cover the end of a piece of Straight Run molding
Note: EC200 must be cut in the field to make an end cap.
|
|
IC200 |
2"
Inside
Corner
Fitting |
|
50 |
...you want to make a 90° inside turn in a corner (such as a wall to wall or ceilling to wall). |
|
RD201 |
2" x 1"
Reducing
Fitting |
|
50 |
...you want to reduce 2" molding to 1" molding. |
|
CT200 |
2"
Crossing
Tee
Fitting |
|
24 |
...you want to branch off in four different directions at 90° angles. |
|
BO200 |
2"
Expansion
Boot |
|
100 |
...you want to create an expansion to cover a hole when entering a lock box, ceiling, or floor. |
|
OA2-58 |
|
|
100 |
...you want to step up or step down from a trim board. Standard offset is 5/8". Fitting can be trimmed. |
|
RT221 |
2" x 2" x 1"
Reducing
Tee |
|
25 |
...you want to reduce 2" molding to 1" molding at a 90° angle to the 2" molding. |
|
BO600 |
2"
Bell
Adapter |
|
25 |
...you want to cover up to a 4 1/2" hole at the bottom of the bell adapter. The top of the bell adapter fits our SR200 Straight Run.
|
|
TE200 |
|
|
25 |
|
