|
Part # |
Description |
Image |
Qty/Box |
Use This Fitting When... |
|
CO100 |
1"
Coupling
Fitting |
|
100 |
...you're joining two pieces of molding.
This Fitting covers the seam. |
|
OC100 |
1"
Outside
Corner
Fitting |
|
100 |
...you want to make a 90° outside turn around a corner (such as two outside walls). |
|
RA100 |
1"
90° Right
Angle
Fitting |
|
100 |
...you want to make a left or right turn at a 90° angle on a flat surface. |
|
TE100 |
1"
Tee
Fitting |
|
100 |
...you want to branch off in three different directions at 90° angles. |
|
EC100 |
1"
End Cap
Fitting |
|
100 |
...you want to cover the end of a piece of Straight Run molding
Note: EC100 must be cut in the field to make the end cap.
|
|
IC100 |
1"
Inside
Corner
Fitting |
|
100 |
...you want to make a 90° inside turn in a corner (such as a wall to wall or ceilling to wall). |
|
RD175 |
1" x 3/4"
Reducing
Fitting |
|
100 |
...you want to reduce 1" molding to 3/4" molding. |
|
CT100 |
1"
Crossing
Tee |
|
100 |
...you want to branch off in four different directions at 90° angles. |
|
BO100 |
1"
Expansion
Boot |
|
100 |
...you want to create an expansion to cover a hole when entering a lock box, ceiling, or floor. |
|
OA1-58 |
|
|
100 |
...you want to step up or step down from a trim board. Standard offset is 5/8". Fitting can be trimmed. |
|
BO300 |
1"
Bell
Adapter |
|
50 |
...you want to cover up to a 2 1/2" hole at the bottom of the bell adapter. The top of the bell adapter fits our SR100 Straight Run.
|
